l'outil coupant pour le bois

High speed steel of high quality, entirely soaked for the hard material work like steel.

Steel alloy with Chromium Vanadium allowing the machining of profile of teeth particularly adapted to the work of wood.

A perfect combination enters the body of the flexible steel blade and the hardness of the steel HSS teeth to cobalt welded onto the blade. This combination of two steels guarantees a hardness, an endurance and a
performance of exceptional cut in studded wood, steel and stainless.

Cross ground, tapered - The edge of each tooth is perpendicular to the axis of cut thus each perfectly aligned tooth works over all its width, guaranteeing a fast, sharp and rectilinear cut. The stripped sides of the blade and the thinned back does not come into contact with wood during sawing and allow a very fine and very clean cutting.

Cross ground set - The wood fibres are cut according to the oblique angle of sharpening of the teeth. This type of teeth guarantees a high cutting speed and is particularly adapted for the cutting of wood.

Milled set - The wood fibres are cut according to the oblique angle of sharpening of the teeth. This type of teeth guarantees a cutting speed high and is particularly adapted for the cutting of wood.

Wavy set - Particularly adapted for the cutting of the thin workpiece, sheet steel or plywood, wavy setting always maintain a surface of contact between the blade and material, avoiding the jolts and thus ensuring a straight cut.

The carbide tipped tooth blade offer high wear resistance and rapid cutting repetition in most abrasives and hard material.